3/28/2023 0 Comments Fluke quickmapHaving visibility into all the connection incidents within a channel is imperative because they are where most fiber failures in enterprise environments occur. Obtain Critical Visibility into the Multimode Channel Power meters and sources are great for testing the entire channel to verify power and loss, but are inefficient for troubleshooting because the user must sequentially test a channel link-by-link, which can take several hours depending on the length of the channel and the number of links. Not only is this process time-intensive, it is also unrealistic in many data center and campus environments in which the links run underneath floor tiles, behind walls, or underground. They also require that the user maintain visual contact with the cabling while tracing its length to locate any faults. Visual fault locators, lasers, or flashlights, while easy to use, have extremely limited troubleshooting capabilities because they are unable to distinguish or locate problematic loss or reflective incidents. Tools normally used for troubleshooting are typically inefficient, ineffective, or both. Averaging six seconds of test time, it quickly provides the visibility and data necessary to locate and fix any issues with your multimode fiber cabling. The Fiber QuickMap troubleshooter, as a single-ended instrument, cuts down your troubleshooting time from hours to mere seconds. No need to fiddle with settings, fiber types, or standards. Simply turn it on, connect to the multimode link to be tested, and press the “TEST” button to obtain the channel visibility you need in order to quickly troubleshoot or verify connectivity. Rugged construction vibration and drop tested to 1 meterįiber QuickMap can be used straight out of the box with no user-setup required. Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries Optional LC, ST and FT interchangeable adapters are available Backlighted display turns off automatically Six-second test time-no more blind troubleshooting that can waste hoursĬhange the Index of Refraction (IOR) to improve fiber length accuracy No lengthy set-up necessaryįind problems quickly. Connect your fiber and press the Test button. Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fiberįind potential sources of high bit error rates caused by reflectance from dirty or poor connectionsĭetects live optical signals before it begins testing Measure up to 4,921 feet (1,500 metres) of fiber in seconds Works on multimode fiber, 50/125µm and 62.5/125 µmĨ50 nm output wavelength. This FQM-M kit includes multimode fiber fault locator unit, screw on interchangeable SC adapter, 4-language Quick Reference Guide (manuals in 9 languages available on-line), safety instruction manual, and batteries. Plus, this rugged fiber troubleshooter is vibration and drop tested to 1 meter, making it a reliable tool for technicians working on multi mode fiber. It gives you the testing results within six seconds on its large backlit display, which auto turns off after five minutes of inactivity. Its simple one-button design means no training necessary and can cut the average job time significantly. This fiber distance and fault locator provides more information that a simple visual fault locator (VFL), but is typically faster and easier to use than an optical time domain reflectometer (OTDR).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |